| Customization: | Available |
|---|---|
| Type: | Steel Bar |
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
|
Still deciding? Get samples of US$ 1500/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Good plasticity and toughness, easy to be formed by cold and hot processing, good machinability after normalizing or cold processing, good weldability, no temper brittleness, poor hardenability and hardenability.. Parts with low stress and high toughness are required for manufacturing, such as car body, storage tank, deep-drawn utensils, pipes, gaskets, etc., which can be used for cold rolling, cold stamping, cold heading, cold bending, hot rolling and other processes, as well as carburized parts and carbonitriding parts with low core strength.
| Unified number Code |
Brand | Chemical composition (mass fraction) (%) | ||||||
| C | Si | Mn | Cr | Ni | Cu | |||
| ≤ | ||||||||
| U20080 | 08F | O.05~O.11 | ≤0.03 | 0.25~0.50 | 0.10 | O.30 | 0.25 | |
| U20l00 | 10F | O.07~O.13 | ≤O.07 | O.25~O.50 | O.15 | 0.30 | 0.25 | |
| U20150 | 15F | 0.12~O.18 | ≤O.07 | 0.25~O.50 | 0.25 | 0.30 | 0.25 | |
| U20082 | 08 | 0.05~O.11 | O.17~O.37 | O.35~O.65 | O.10 | O.30 | O.25 | |
| U20102 | lO | 0.07~O.13 | 0.17~O.37 | 0.35~0.65 | 0.15 | O.30 | O.25 | |
| U20152 | 15 | O.12~0.18 | 0.17~O.37 | O.35~0.65 | O.25 | O.30 | O.25 | |
| U20202 | 20 | O.17~0.23 | 0.17~0.37 | 0.35~0.65 | O.25 | O.30 | O.25 | |
| U20252 | 25 | O.22~0.29 | 0.17~O.37 | O.50~O.80 | O.25 | O.30 | 0.25 | |
| U20302 | 30 | O.27~O.34 | O.17~O.37 | O.50~O.80 | 0.25 | O.30 | 0.25 | |
| U20352 | 35 | O.32~0.39 | O.17~O.37 | O.50~O.B0 | 0.25 | O.30 | 0.25 | |
| U20402 | 40 | 0.37~O.44 | 0.17~O.37 | O.50~O.80 | O.25 | O.30 | O.25 | |
| U20452 | 45 | O.42_O.50 | O.17~O.37 | 0.50~0.80 | 0.25 | O.30 | 0.25 | |
| U20502 | 50 | 0.47~0.55 | 0.17~O.37 | 0.50~0.80 | 0.25 | O.30 | O.25 | |
| U20552 | 55 | O.52~0.60 | O.17~O.37 | O.50~0.80 | O.25 | 0.30 | O.25 | |
| U20602 | 60 | 0.57~O.65 | 0.17~O.37 | 0.50~O.80 | O.25 | O.30 | 0.25 | |
| U20652 | 65 | O.62~0.70 | 0.17~0.37 | O.50~O.80 | O.25 | O.30 | O.25 | |
| U20702 | 70 | O.67~0.75 | 0.17~0.37 | O.50~O.80 | 0.25 | O.30 | O.25 | |
| U20752 | 75 | O.72~0.80 | 0.17~O.37 | 0.50~0.80 | 0.25 | O.30 | O.25 | |
| U20802 | 80 | O.77~0.85 | O.17~0.37 | O.50~O.80 | 0.25 | O.30 | 0.25 | |
| U20852 | 85 | O.82~0.90 | O.17~0.37 | 0.50~O.80 | O.25 | O.30 | O.25 | |
| U21152 | 15Mm | O.12~O.18 | O.17~O.37 | O.70~1.00 | O.25 | O.30 | 0.25 | |
| U21202 | 20Mn | 0.17~O.23 | O.17~O.37 | O.70~1.00 | O.25 | 0.30 | O.25 | |
| U21252 | 25Mn | O.22~O.29 | 0.17~0.37 | O.70~1.00 | O.25 | O.30 | O.25 | |
| U21302 | 30Mn | 0.27~O.34 | O.17~0.37 | 0.70~1.00 | O.25 | O.30 | 0.25 | |
| U21352 | 35Mn | O.32~O.39 | O.17~O.37 | O.70~1.00 | 0.25 | O.30 | O.25 | |
| U21402 | 40Mn | O.37~0.44 | O.17~0.37 | O.70~1.00 | 0.25 | 0.30 | O.25 | |
| U21452 | 45Mn | 0.42~0.50 | 0.17~O.37 | 0.70~1.00 | O.25 | O.30 | O.25 | |
| U21502 | 50Mn | O.48~0.56 | O.17~O.37 | O.70~1.00 | 0.25 | 0.30 | 0.25 | |
| U21602 | 60Mn | 0.57~0.65 | O.17~O.37 | 0.70~1.00 | 0.25 | 0.30 | 0.25 | |
| U21652 | 65Mn | 0.62~0.70 | 0.17~O.37 | O.90~1.20 | O.25 | 0.30 | 0.25 | |
| U21702 | 70Mn | 0.67~O.75 | 0.17~0.37 | 0.90~1.20 | O.25 | O.30 | O.25 | |
|
Flat Bar Size
|
Round Bar Size(mm)
|
|||
|
Thickness
|
Width
|
Length
|
Diameter
|
Length
|
|
10-700
|
155-2200
|
2000-6000
|
20-200
|
3000-6000
|
| Steel Grade | CK10 S10C S12C 10#1010 15#1015 S15C S17C CK15 25#1025 S25C S28C 1040 40#S40C S43C C40 1045 45#S45C S48C C45 1050 50#S50C S53C C50 15Mn 1019 1020 1025 1040 1019 1008 1010 1015 1040 1045 1030 30#C30 CK30 S30C 1035 35#C35 CK35 S35C 1055 55#C55 CK55 S55C 1060 60#C60 CK60 S58C 1069 70#1070 C70 CK70 1064 1065 65#C67 CK67 1074 1075 75#C75 CK75 08F 1008 1010 |
| Standard | AISI EN DIN GB JIS ASTM |
| Technique | Hot Rolled/ Forged/ Cold drawn |
| Alloy Or Not | Not-Alloy |
Processing |
Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling |
| Tolerance | ±1% |
| Processing Service | Bending, Welding, Decoiling, Cutting, Punching |
| Delivery Time | 8-14days |
| Product Name | Carbon structural steel |
| Length | 1-12m |
| Technology | Hot Rolled, Hot Forge, Cold Drawn |
| Process | Forging+Machining(if Need)+surface Treatment |
| MOQ | 1 Ton |
| Diameter | 6mm-800mm |
| Shape | Round. Square. Rectangular |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawin
){kind=link}