| Customization: | Available |
|---|---|
| Type: | Seamless |
| Technique: | Hot Rolled |
|
Still deciding? Get samples of US$ 750/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ASTM 5115 GB 15Cr | It can be used to manufacture various carburized parts with high surface wear resistance, high core strength and toughness, high working speed but less than 30mm section size, such as crank pin, piston pin, piston ring, coupling, small camshaft, pinion, slide valve, piston, bushing, bearing ring, screw, rivet, etc., and can also be used as hardened steel. It can also be used to manufacture small parts with certain strength and toughness, but wide deformation requirements. |
| ASTM 5120 GB 20Cr | It is used to manufacture various carburized or carbonitriding parts with small section (less than 30mm), simple shape, high speed, small load, surface wear resistance and high core strength, such as pinion, pinion, valve, piston pin, bushing ratchet, tray, cam, worm, tooth clutch, etc. For parts with small heat treatment deformation and high wear resistance requirements, general quenching or high-frequency quenching shall be carried out after carburizing, such as small module (less than 3mm) gear Spline shaft, shaft, etc. can also be used as quenched and tempered steel for manufacturing parts with low speed and medium load (impact). |
| ASTM 5130 GB 30Cr | It is used to manufacture various wear-resistant or impacted parts, such as gears, rollers, shafts, levers, rocker rods, connecting rods, bolts, nuts, etc. It can also be used as high-frequency surface hardening steel to manufacture wear-resistant and high-hardness parts. |
| ASTM 5135 5132 GB 35Cr | It is used for manufacturing gears, shafts, rollers, bolts and other important quenched and tempered parts. Its purpose is basically the same as that of 5130. |
| ASTM 5140 GB 40Cr | After quenching and tempering, it is used to manufacture parts with medium speed and medium load, such as machine tool gear, shaft, worm, spline shaft, thimble sleeve, etc. After quenching and tempering and high-frequency surface quenching, it is used to manufacture parts with high surface hardness and wear resistance, such as gear, shaft, main shaft, crankshaft, mandrel, sleeve, pin, connecting rod, screw, nut, intake valve, etc. After quenching and medium temperature tempering, it is used to manufacture parts with heavy load and medium speed impact, such as oil pump rotor, slide Gears, spindles, collars, etc. are used to manufacture heavy-duty, low-impact and wear-resistant parts after quenching and low-temperature tempering, such as worms, spindles, shafts, collars, etc. After carbonitriding treatment, transmission parts with large size and high low-temperature impact toughness, such as shafts, gears, etc. |
| ASTM 5145 GB 45Cr | Similar to 5140, it is mainly used for manufacturing high-frequency surface hardened shafts, gears, sleeves, pins, etc. |
| ASTM 5150 GB 50Cr | It is used to manufacture heavy-duty and wear-resistant parts, such as hot-rolled rolls, transmission shafts, gears, thrust rings below 600mm, mandrels of backup rolls, connecting rods and tappets of diesel engines, tractor clutches and bolts, wear-resistant and high-strength oil film bearing sleeves and gears in heavy mining machinery, as well as high-frequency surface-hardened parts, moderately elastic springs, etc. |
| Material | C | Si | Mn | P | S | Cr | Ni | Cu | Mo |
| ASTM 5115 GB 15Cr | 0.12-0.18 | 0.17-0.37 | 0.4-0.7 | 0.035 | 0.035 | 0.7-1 | 0.3 | 0.3 | 0.15 |
| ASTM 5120 GB 20Cr | 0.18-0.24 | 0.5-0.8 | 0.7-0.9 | 0.035 | 0.035 | 0.7-1 | 0.3 | 0.3 | 0.15 |
| ASTM 5130 GB 30Cr | 0.27-0.34 | 0.17-0.37 | 0.5-0.8 | 0.035 | 0.035 | 0.8-1.1 | 0.3 | 0.3 | 0.15 |
| ASTM 5135 GB 35Cr | 0.32-0.39 | 0.17-0.37 | 0.5-0.8 | 0.035 | 0.035 | 0.8-1.1 | 0.3 | 0.3 | 0.15 |
| ASTM 5140 GB 40Cr | 0.37-0.44 | 0.17-0.37 | 0.5-0.8 | 0.035 | 0.035 | 0.8-1.1 | 0.3 | 0.3 | 0.15 |
| ASTM 5145 GB 45Cr | 0.42-0.49 | 0.17-0.37 | 0.5-0.8 | 0.035 | 0.035 | 0.8-1.1 | 0.3 | 0.3 | 0.15 |
| ASTM 5150 GB 50Cr | 0.47-0.54 | 0.17-0.37 | 0.5-0.8 | 0.035 | 0.035 | 0.8-1.1 | 0.3 | 0.3 | 0.15 |
| Material | Diameter of sample d mm |
Heat treatment or condition. | Tensile strength σb Mpa |
Point of yield σs Mpa |
Ratio of elongation δ % |
Reduction of section ψ % |
hardness HBW |
Shock absorption energy KV2 J |
| ASTM 5115 GB 15Cr | d=25 | Quenching + tempering | ≥735 | ≥490 | ≥11 | ≥45 | ≤179 | ≥55 |
| ASTM 5120 GB 20Cr | d=25 | Quenching + tempering | ≥835 | ≥540 | ≥10 | ≥40 | ≤179 | ≥47 |
| ASTM 5130 GB 30Cr | d=25 | Quenching + tempering | ≥885 | ≥685 | ≥11 | ≥45 | ≤187 | ≥47 |
| ASTM 5135 GB 35Cr | d=25 | Quenching + tempering | ≥930 | ≥735 | ≥11 | ≥45 | ≤207 | ≥47 |
| ASTM 5140 GB 40Cr | d=25 | Quenching + tempering | ≥980 | ≥785 | ≥9 | ≥45 | ≤207 | ≥47 |
| ASTM 5145 GB 45Cr | d=25 | Quenching + tempering | ≥1030 | ≥835 | ≥9 | ≥40 | ≤217 | ≥39 |
| ASTM 5150 GB 50Cr | d=25 | Quenching + tempering | ≥1080 | ≥930 | ≥9 | ≥40 | ≤229 | ≥39 |
| REGULAR SIZE OF SEAMLESS STEEL PIPES | ||||
| SIZE (OUTER DIAMETER) | WALL THICKNESS | LENGTH | ||
| schedule 40 | schedule 80 | schedule 160 | ||
| 17.14MM (3/8") | 2.31 MM | 3.20 MM | ____ | 6M IN STOCK (OR CUSTOMIZED) |
| 21.34MM ( 1/2") | 2.77 MM | 3.73 MM | 4.78 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 26.67MM (3/4") | 2.87 MM | 3.91 MM | 5.56 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 33.4MM (1") | 3.38 MM | 4.55 MM | 6.35 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 42.16MM(1 1/4") | 3.56 MM | 4.85 MM | 6.35 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 48.26MM (1 1/2") | 3.68 MM | 5.08 MM | 7.14 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 60.32MM (2") | 3.91 MM | 5.54 MM | 8.74 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 73.02MM (2 1/2") | 5.16 MM | 7.01 MM | 9.52 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 88.9MM (3") | 5.49 MM | 7.62 MM | 11.12 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 114.3MM (4") | 6.02 MM | 8.56 MM | 13.49 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 141.3MM (5") | 6.55 MM | 9.53 MM | 15.88 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 168.28 MM (6") | 7.11 MM | 10.97 MM | 18.26 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 219.08MM (8") | 8.18 MM | 12.7 MM | 23.01 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 273.05MM (10") | 9.27 MM | 15.09 MM | 28.58 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 323.85MM (12") | 10.31 MM | 17.48 MM | 33.32 MM | 6M IN STOCK (OR CUSTOMIZED) |
| 355.6MM (14") | 11.13 MM | 19.05 MM | 6M IN STOCK (OR CUSTOMIZED) | |
| 406.4MM (16") | 12.70 MM | 21.44 MM | 6M IN STOCK (OR CUSTOMIZED) | |
| 457.2MM (18") | 14.27 MM | 23.82 MM | 6M IN STOCK (OR CUSTOMIZED) | |
| 508 MM (20") | 15.09 MM | 26.19 MM | 6M IN STOCK (OR CUSTOMIZED) | |
| 609.6MM (24") | 17.48 MM | 30.96 MM | 6M IN STOCK (OR CUSTOMIZED) | |
1. Bundle and pack.
2. Warning for inclined end or flat end or according to buyer's requirements.
3. Marking: According to customer requirements.
4. Apply varnish.
5. Plastic covers at both ends.
Q1:who are we?
A:We are based in Shandong, China, start from 2022,sell to North America(60.00%),Western Europe(14.00%),South America(6.00%).
There are total about 11-50 people in our office.
Q2. how can we guarantee quality?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q3.what can you buy from us?Which ports are accepted for delivery?
A:Copper,Aluminum,Mould steel, Seamless carbon steel,Precision steel pipe,The steel plate,Alloy steel,Titanium,Custom machine parts.It can be delivered from Qingdao, Tianjin, Shanghai, Guangzhou and other ports.
Q4.why should you buy from us not from other suppliers?
A:Shandong Meide Import and Export Co., Ltd. has 25 years of production experience. With advanced precision production equipment
and modern large warehouses, has a stockpile of 200,000 tons of goods, has a number of long-term stable cooperative customers.
Q5.what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal;
Language Spoken:English,Chinese
Q6.Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q7.How can we get your price ?
A:We need below information to quote for you:
1). Product Name
2). Standard
3). Material Grade (Chemical Composition)
4). Dimension
5). Quantity
6). The Drawing for Special Parts
){kind=link}