Type: | Steel Bar |
---|---|
Standard: | AISI, ASTM, DIN, JIS, GB, BS |
Composition: | Alloy Steel |
Technique: | Hot Rolled |
Shape: | Bar |
Surface Treatment: | Bright, Chrome Plated |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
component
|
C
|
Si
|
Mn
|
P
|
S
|
Cr
|
Ni
|
Cu
|
Mo
|
minimum value
|
0.17
|
0.17
|
1.2
|
-
|
-
|
-
|
-
|
-
|
-
|
Maximum value
|
0.23
|
0.37
|
1.6
|
0.035
|
0.035
|
0.3
|
0.3
|
0.3
|
0.15
|
Category | Grade | Diameter |
High speed steel | 6542,M2,M35,M42 | 1mm-600mm |
Mold steel | Cr12,Cr12MoV,Cr12Mo1V1,D2,SKD11,DC53 | 1mm-600mm |
Carbon structure steel | Q195, Q215, Q235, Q275 | 1mm-600mm |
Low alloy high strength structure steel | Q295, Q345, Q390, Q420, Q460 | 1mm-600mm |
Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 | 1mm-600mm |
Alloy structure steel | 30Mn2, 40Mn2, 27SiMn, 42Crmo,20Cr, 40Cr, 20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi,20MnVB, 20MnTiB, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V, 45MnV, |
1mm-600mm |
Spring Steel | 65Mn, 60Si2Mn, 50CrVA | 1mm-600mm |
Bearing Steel | GCr15, GCr15GD,55SiMoV | 1mm-600mm |
Structural steels subject to end-quench hardenability requirements | 20CrMnTi, 30CrMnTi, 20Cr, 40Cr, 30CrMo, 42CrMoA, 27SiMn, 40Mn2H, 20CrNiMo, 40Mn2, q345b, 35MnBM, 40MnB,45MnV. | 1mm-600mm |
This is a kind of carburizing steel with good properties. Its characteristics are similar to those of 20CrMnTi and 20CrNi steels. It has high strength, wear resistance and hardenability. The critical quenching diameter in oil is 27~53mm. The machinability, carburizing and heat treatment process properties of the steel are good. There is no tendency of grain growth when carburizing for a long time at high temperature, and the carbon concentration distribution in the carburized layer decreases gently, which will not cause sudden changes in the structure and properties. It can also be directly cooled and quenched after carburizing; Compared with 20CrMnTi steel, its disadvantages are large quenching deformation and more decarburization. This steel can be used as a substitute for 20CrMnTi, 20Cr and 20CrNi. Used to manufacture medium and small carburized parts with large modulus and heavy load. Such as: gears and shafts on heavy machine tools, driving and passive gears on the rear axle of automobiles, etc.
Sample diameter
d mm |
Heat treatment or condition
|
tensile strength
σb Mpa |
Yield point
σs Mpa |
Elongation
δ % |
Reduction of area
ψ % |
hardness
HBW |
Impact absorbed energy
KV2 J |
d=25
|
Quenching+tempering
|
≥1080
|
≥885
|
≥10
|
≥45
|
≤207
|
≥55
|
GRADE
|
SIZE(MM)
|
GRADE
|
SIZE(MM)
|
8#-10#
|
∮16-290
|
65Mn
|
∮40-300
|
15#
|
∮14-150
|
45Mn2
|
∮18-75
|
20#
|
∮8-480
|
60Si2Mn
|
∮16-150
|
35#
|
∮8-480
|
20CrMnTi
|
∮10-480
|
45#
|
∮6.5-480
|
20crmnTiB
|
∮16-75
|
Q235B
|
∮6.5-180
|
GCr15
|
∮16-400
|
40Cr
|
∮8-480
|
ML35
|
∮8-150
|
20Cr
|
∮10-480
|
T8-T13
|
∮8-480
|
42CrMo
|
∮12-480
|
Cr12
|
∮16-300
|
35CrMo
|
∮12-480
|
Cr12MoV
|
∮16-300
|
20CrMo
|
∮12-300
|
3Cr2W8V
|
∮16-300
|
38CrMoAL
|
∮20-300
|
45Cr50Cr
|
∮20-300
|
5CrMnMo
|
∮20-450
|
20CrMnMo
|
∮20-300
|
16Mn(Q345B)
|
∮14-365
|
40Mn2
|
∮28-60
|
50Mn
|
∮40-200
|
35Cr
|
∮55
|
15CrMo
|
∮20-75
|
15Mn
|
∮32∮170
|
25#
|
∮16-280
|
40CrMnMo
|
∮80-∮160
|
YF45MnV
|
∮28-80
|
20CrMnMo
|
∮20-300
|
30#
|
∮6.5-480
|
27 SiMn
|
∮20-350
|
30Crmo
|
∮28
|
Crwmn
|
∮20-300
|
30CrmnTi
|
∮16-300
|
H13(4Cr5MoSiVi)
|
∮20-300
|
60#
|
∮210.∮260
|
40crNimo
|
∮20-400
|
Packaging |
1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 2. after making by bundle, covered with Polyethylene waterproof cloth. 3. make black paints painting on each bar, then make bundles |
20 feet container contains dimension | Length under 6000mm |
40 feet container contains dimension | Length under 12000mm |
By bulk vessel | Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawin
Suppliers with verified business licenses