Type: | Seamless |
---|---|
Technique: | Cold Drawn |
Material: | Carbon Steel |
Surface Treatment: | Oil, Bared, Black Paint, Galvanized |
Usage: | Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose |
Section Shape: | Square/Rectangular |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Seamless rectangular steel pipe is a square, rectangular steel pipe with a hollow section and no seams around it. Seamless steel pipes are made from steel ingots or solid tube blanks that are perforated into tubes, and then hot rolled, cold rolled, or cold drawn. Seamless steel pipes have a hollow cross-section and are widely used as pipelines for conveying fluids. Compared to solid steels such as round steel, steel pipes have a lower weight and the same flexural and torsional strength. They are a type of economical cross-section steel, and are widely used in the manufacture of structural and mechanical components such as petroleum drill pipes, automotive transmission shafts, bicycle racks, and steel scaffolds used in construction.
component | C | Si | Mn | P | S | Cr | Ni | Cu | As |
minimum value | - | - | - | - | - | - | - | - | - |
Maximum value | 0.2 | 0.35 | 1.4 | 0.045 | 0.045 | 0.3 | 0.3 | 0.3 | 0.08 |
GB | ISC | CNS | JIS | KS | ASTM | UNS | ISO | DIN EN/DIN | W-Nr. |
Q235A Q235B Q235C Q235D (A3) (C3) |
U12352 U12355 U12358 U12359 |
SS400 | SS400 (SS41) |
SS400 | A570 Gr.A A570 Gr.D A283M Gr.D |
K02501 K02502 |
Fe360A Fe360D |
S235JR S235JRG1 S235JRG2 (St37-2) (USt37-2) (RSt37-2) |
1.0037 1.0036 1.0038 |
Thickness (diameter) t(d) mm |
tensile strength σb Mpa |
Yield point σs Mpa |
Elongation δ % |
≤16 | 370~500 | ≥235 | ≥26 |
>16~40 | 370~500 | ≥225 | ≥26 |
>40~60 | 370~500 | ≥215 | ≥25 |
>60~100 | 370~500 | ≥215 | ≥24 |
>100~150 | 370~500 | ≥195 | ≥22 |
>150~200 | 370~500 | ≥185 | ≥21 |
Product details |
brand:meide |
Material: Q345A,Q345B,20#,45#,Q235 ,SS400 |
Special Pipe:Square and rectangular tube |
Outer Diameter:15x15mm---1000x1000mm |
Length::5.8m-12m |
Thickness:0.6 - 50 mm |
Section Shape:Square |
Place of Origin: Liaocheng, China (Mainland) |
Secondary Or Not:Non-secondary |
Application:Structure Pipe |
Certification:CE |
Surface Treatment: black, oil, Black Oil Surface Or Other Anti-corrosive Treatment 1)Black,Pre-galvanized 2)oiled,powder coating 3)Galvanized as your requirement PS:Pre galvanized steel pipe: 60-150g/m2;Hot dipped galvanized steel pipe: 200-400g/m2 |
Inspection With Chemical Composition and Mechanical Properties Testing; Hydrostatic Test, Dimensional and Visual Inspection, With Nondestructive Inspection |
Special Pipe:Square and rectangular tube |
Anual Output:50000Tons |
Price Item:FOB, CIF, CFR, EXW |
Terms of payment: L/C, T/T, Western Union,Cash. |
Company Type:Manufaturer,supplier ,trade |
End protector:Plastic Pipe Cap |
Stock or not: enough Stock |
Others 1:Special design available according to requirement 2:Pipe can be necked dowm, punching hole on pipe wall. 3:Pipe fittings, elbows are available. |
HS CODE:730490000 |
Usage:Construction Structure |
1. Purpose of Cold Drawn Seamless Rectangular Pipe Cold drawn seamless rectangular pipe is widely used in construction, machinery, chemical, light industry, automotive, aerospace, metallurgy, and other industries, and can be made into pipes of various sizes, shapes, and performance.
2. Seamless cold drawn square pipe is a kind of hollow square section lightweight thin-walled steel pipe, also known as steel cold formed profiles. Seamless cold drawn square tubes are widely used. It is widely used in the manufacture of structural and mechanical parts, such as petroleum drill pipes, automobile transmission shafts, bicycle frames, and steel scaffolding used in construction. Steel pipes are widely used to manufacture circular parts, which can improve material utilization, simplify manufacturing processes, and save materials and processing hours. Steel pipes have been widely used for manufacturing
+C(BK) | Cold drawn/hard.After the last cold forming,no heat treatment. |
+LC(BKW) | Cold drawn/soft.After the last heat treatment follows the cold drawing there is a light finishing pass. |
+SR(BKS) | Cold drawn and stress relieved annealed. After the final cold drawing process the tubes are stress relieved annealed in a controlled atmosphere. |
+A(GBK) | After the final cold drawing process the tubes are stress relieved annealed in a controlled atmosphere. |
+N(NBK) | Normalized. After the last cold drawing process the tubes are annealed in a controlled atmosphere. |
Out Diameter | Wall Thickness | Square Pipe/Tube(mm) | Rectangular Pipe/Tube(mm) | |||
Inch | mm | mm | 16×16×0.4~1.5 | 70×70×2.0~6.0 | 10×20×0.6~1.5 | 30×60×1.0~4.5 |
1/2 | 21.3 | 0.6-3.0 | 18×18×0.4~1.5 | 75×75×2.0~6.0 | 14×21×0.6~1.5 | 40×50×1.0~4.5 |
3/4 | 26.9 | 0.6-3.0 | 20×20×0.4~1.5 | 80×80×2.0~6.0 | 15×30×1.5~1.5 | 40×60×1.0~5.0 |
1 | 33.4 | 1.0-3.0 | 25×25×0.6~2.0 | 85×85×2.0~6.0 | 15×38×0.6~1.5 | 40×80×1.5~5.0 |
1 1/4 | 42.3 | 1.0-4.0 | 30×30×0.6~4.0 | 95×95×2.0~8.0 | 20×30×0.6~2.0 | 40×100×2.0~5.0 |
1 1/2 | 48.3 | 1.0-4.0 | 34×34×1.0~2.0 | 100×100×2.0~8.0 | 20×40×0.8~2.0 | 50×60×2.0~5.0 |
2 | 60.3 | 1.5-4.0 | 35×35×1.0~4.0 | 120×120×4.0~8.0 | 20×50×1.0~2.0 | 50×80×2.0~5.0 |
2 1/2 | 76.1 | 1.5-4.0 | 38×38×1.0~4.0 | 150×150×6.0~10.0 | 22×35×0.9~2.0 | 50×100×2.0~8.0 |
3 | 88.9 | 1.5-9.5 | 40×40×1.0~4.5 | 180×180×6.0~12.0 | 25×40×0.9~3.75 | 60×80×2.0~6.0 |
4 | 114.3 | 2.0-9.5 | 44×44×1.0~4.5 | 200×200×6.0~12.0 | 25×65×1.0~2.0 | 80×100×2.0~8.0 |
5 | 141.3 | 3.0-9.5 | 45×45×1.0~5.0 | 220×220×6.0~14.0 | 30×40×1.0~3.75 | 120×60×2.5~10.0 |
6 | 168.3 | 3.0-12.0 | 50×50×1.0~5.0 | 250×250×6.0~14.0 | 30×45×1.0~3.75 | 120×80×2.5~10.0 |
8 | 219.1 | 3.2-12.0 | 60×60×1.5~5.0 | 30×50×1.0~4.0 | ||
10 | 273 | 3.2-12.0 | ||||
12 | 323.8 | 6.0-15.0 | ||||
14 | 355.6 | 8.0-15.0 | ||||
16 | 406.4 | 8.0-20.0 |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawin
Suppliers with verified business licenses