Forged Alloy Steel Bar 60crmnb Sup11A 51b60 A22609 Steel Rod 60crmnmo Steel Roung Bars

• Type: Steel Bar
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Composition: Carbon Steel
• Technique: Hot Rolled
• Shape: Bar
• Surface Treatment: Blace/Polishing/Oiling or Galvanizing/ etc
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application: Wear-Resistant Steel, Cold Heading Steel, Free-Cut
• Transport Package: Standard Seaworthy Export Packaging or as Required
• Specification: 3000-9000mm
• Trademark: meide
• Origin: Shandong, China
• HS Code: 84802000
• Production Capacity: 1000 Ton/Month

Product Description

About products

There are many kinds of alloy steels, which are generally divided into low alloy steels (content<5%), medium alloy steels (content 5%~10%) and high alloy steels (content>10%) according to the content of alloy elements; It is divided into high-quality alloy steel and special alloy steel according to quality; According to characteristics and applications, it can also be divided into alloy structural steel, stainless steel, acid resistant steel, wear-resistant steel, heat-resistant steel, alloy tool steel, rolling bearing steel, alloy spring steel and special performance steel (such as soft magnetic steel, permanent magnetic steel, non magnetic steel

chemical composition

 

Grade	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
minimum value	0.56	0.17	0.7	-	-	0.7	-	-	0.25
Maximum value	0.64	0.37	1	0.025	0.02	1	0.35	0.25	0.35

Approximate comparison table

GB	ISC	CNS	JIS	KS	AISI	UNS	ISO	DIN EN/DIN	W-Nr.
55CrMnMoA	A34603	SUP13	SUP13	SPS9	4160	G41600	60CrMo3-3	≈51CrMoV4	1.7701

Product Description

Product name	Alloy/carbon steel bar/rod
Dimension	thickness : 8-250mm  or customizable
	width: 1500-5500mm  or customizable
	length : 3000-18000mm or customizable
Application	It is mainly used in tool steel, cementation steel and bearing steel.Like reactor, heat exchanger, separator, spherical tank,liquefied gas tank, nuclear reactor pressure vessel, boiler steam drum, liquefied gas cylinders, hydropower station high pressure hose, spiral case and other equipment and components.
Technique	Hot-rolled, controlled rolling, normalizing or as required
Surface	Mill Finished or as per required
Certification:	BV, ISO, CE
Payment terms	T/T , L/C, West union and Other
Remarks	Upon the final quantity you demand
	MTC will be handed on with shipping documents
	We accept the third party certification test

Mechanical properties

 

Heat treatment or condition	tensile strength σb  Mpa	Yield point σs  Mpa	Elongation δ  %	Reduction of area ψ  %	hardness  HBW
Quenching and tempering	≥1450	≥1300	≥6	≥30	-
Hot rolled (WHR)	-	-	-	-	Negotiation between the Supplier and the Demander
Stress relief annealing (A)	-	-	-	-	≤280
Softening annealing (SA)	-	-	-	-	≤248
The mechanical properties in the table are applicable to bars with diameter or side length no more than 80mm and flat steel with thickness no more than 40mm. For bars with diameter or side length greater than 80mm and flat steel with thickness greater than 40mm, the elongation after fracture and reduction of area are allowed to decrease by 1% (absolute value) and 5% (absolute value) respectively compared with those specified in the table

Application

60Cr3 (1.7177) spring steel has higher strength, plasticity and toughness, better hardenability, lower overheating sensitivity than manganese steel, higher than silicon manganese steel, less decarburization tendency than silicon manganese steel, and greater tempering brittleness. It is used to make leaf spring with heavy load and large stress and coil spring with large diameter in vehicle and tractor industry.

Packaging	1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 2. after making by bundle, covered with Polyethylene waterproof cloth. 3. make black paints painting on each bar, then make bundles
20 feet container contains dimension	Length under 6000mm
40 feet container contains dimension	Length under 12000mm
By bulk vessel	Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo

FAQ

1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.

2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;

3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.

5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese

6. How can we get your price?
A. We need the following information to quote for you:
1).  Product Name
2).  standard
3).  Material grade (chemical composition)
4).  dimension
5).  amount
6).  Special part drawin