Factory Customizable ASTM/AISI 4140/Scm440/42CrMo4/1.7225/42CrMo Bright Alloy Steel Rod /Bar

• Type: Square Steel, Flat Steel, Hexagonal Steel4
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Composition: Alloy Steel
• Technique: Hot Rolled
• Shape: Bar
• Surface Treatment: Blace/Polishing/Oiling or Galvanizing/ etc
• Model NO.: ASTM/AISI 4140/SCM440/42CrMo4/1.7225/42CrMo
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application: Wear-Resistant Steel, Cold Heading Steel, Free-Cut
• Transport Package: Standard Seaworthy Export Packaging or as Required
• Specification: 3000-9000mm
• Trademark: meide
• Origin: Shandong, China
• HS Code: 7215500000
• Production Capacity: 1000 Ton/Month

Product Description

About products

42CrMo steel belongs to alloy structural steel in terms of material classification. It has good mechanical properties and machinability, and is widely used. There are mainly two types of materials, plate and round bar, with comprehensive properties superior to 40cr

chemical composition

 

Material	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
ASTM 5115	0.18	0.37	0.7	0.035	0.035	1	0.3	0.3	0.15
ASTM 5120	0.24	0.37	0.8	0.035	0.035	1	0.3	0.3	0.15
ASTM 5130	0.34	0.37	0.8	0.035	0.035	1.1	0.3	0.3	0.15
ASTM 5140	0.44	0.37	0.8	0.035	0.035	1.1	0.3	0.3	0.15
ASTM 5145	0.49	0.37	0.8	0.035	0.035	1.1	0.3	0.3	0.15
ASTM 4119	0.15	0.37	0.7	0.035	0.035	0.7	0.3	0.3	0.55
ASTM 4130	0.34	0.37	0.7	0.035	0.035	1.1	0.3	0.3	0.25
ASTM 1335	0.38	0.35	1.9	0.035	0.04	0.2	0.25	0.35	0.06
ASTM 4317	0.4	0.37	0.7	0.035	0.035	1.1	0.3	0.3	0.25
ASTM 4140	0.45	0.37	0.8	0.035	0.035	1.2	0.3	0.3	0.25
GB38CrMoAI/JIS SCM645	0.42	0.45	0.6	0.035	0.035	1.65	0.3	0.3	0.25
ASTM 6150	0.54	0.37	0.8	0.025	0.025	1.1	0.3	0.25	0.1
ASTM 4142	0.45	0.37	1.2	0.035	0.035	1.2	0.3	0.3	0.3

Approximate comparison table

GB	JIS	ASTM/AISI	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Digital brand
42CrMo	SCM440 SCM440H	4140	G41400	42CrMo4	42CrMo4	1.7225	42CD4	42CrMo4	1.7225

Product Description

Commodity	Cold Drawing / Drawn Flat/ Square / Rectangular / Rectangle / Hexagonal / Special Shape Rods Bars
Grades	Carbon steel	SAE 1018 , A36, SS400, S235JR, Q235, SAE 1020, S20C , 1.0402, 20GB, CK22,  SAE 1045 ,S45C, C45, CK45, EN8 ,1.1191
	Alloy steel	SAE 5120 , 20Cr, Scr 420H, 20Cr4, SAE 5140 , 40Cr,SCr440, 520M40,  SAE 4130 , 30CrMo, SCM430, SCM420, SAE 4140 , 42CrMo4, EN19, SCM440,  708A42, 708M40, SAE 4340, 40CrNiMoA,871M40 , SNCM439
Specification	Round Bar	5mm to 100mm
	Square bar	5*5mm to 120*120mm
	Flat bar	5*20mm to 20*100mm
	hex bar	5mm to 120mm
	hexagonal bar	5mm to 120mm (side to side)
Tolerance	Class H11
Length	4-12m random length or as per request fixed length
Surface	Bright, or dark as per required
Packing	Wrapped by plastic clothes and steel strips
Delivery Condition	BK, BKW, GBK, NBK
Container Size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)
Application	hardware tools, auto parts, standard parts, fasteners common shaft, machinery manufacturing, light industry, hardware, bicycles, cars, motorcycles, textile machinery, transformers and other machinery industry.
Advantages	greater size accuracy, straightness and increased tensile and yield strength as well as improved machinability
MOQ	1 tons

Theoretical weight table of square steel
Side length (mm)	Cross sectional area (cm2)	Theoretical weight (kg/m)	Side length (mm)	Cross sectional area (cm2)	Theoretical weight (kg/m)
5mm	0.25	0.196	30mm	9.00	7.06
6mm	0.36	0.283	32mm	10.24	8.04
7mm	0.49	0.385	34mm	11.56	9.07
8mm	0.64	0.502	36mm	12.96	10.17
9mm	0.81	0.636	38mm	14.44	11.24
10mm	1.00	0.785	40mm	16.00	12.56
11mm	1.21	0.95	42mm	17.64	13.85
12mm	1.44	1.13	45mm	20.25	15.90
13mm	1.69	1.33	48mm	23.04	18.09
14mm	1.96	1.54	50mm	25.00	19.63
15mm	2.25	1.77	53mm	28.09	22.05
16mm	2.56	2.01	56mm	31.36	24.61
17mm	2.89	2.27	60mm	36.00	28.26
18mm	3.24	2.54	63mm	39.69	31.16
19mm	3.61	2.82	65mm	42.25	33.17
20mm	4.00	3.14	70mm	49.00	38.49
21mm	4.41	3.46	75mm	56.25	44.16
22mm	4.84	3.80	80mm	64.00	50.24
24mm	5.76	4.52	85mm	72.25	56.72
25mm	6.25	4.91	90mm	81.00	63.59
26mm	6.76	5.30	95mm	90.25	70.85
28mm	7.84	6.15	100mm	100.00	78.50

mechanical behavior

 

1.Critical point temperature (approximate value): Ac1=730 ° C, Ac3=800 ° C, Ms=310 ° C; Ac1 - lower critical temperature of heating, Ac3 - upper critical temperature of hypoeutectoid steel heating, Ms - martensite point, i.e. the starting temperature of martensite transformation
2. Linear expansion coefficient: temperature 20~100 ° C/20~200 ° C/20~300 ° C/20~400 ° C/20~500 ° C/20~600 ° C, linear expansion coefficient (10 - 6 K - 1): 11.1/12.1/12.9/13.5/13.9/14.1
3.0 Modulus of elasticity: temperature: 20 ° C/300 ° C/400 ° C/500 ° C/600 ° C, modulus of elasticity (GPa): 210/185/175/165/155

Characteristics and application: 42CrMo steel belongs to ultra-high strength steel, with high strength and toughness, good hardenability, no obvious tempering brittleness, small deformation during quenching, high fatigue limit and multiple impact resistance after quenching and tempering, good impact toughness at low temperature, and high creep strength and endurance strength at high temperature. Generally used after quenching and tempering, it can replace quenched and tempered steel with high nickel content. The surface quenching after quenching and tempering is usually used as the heat treatment scheme for this steel. It is used to manufacture important parts with higher requirements or larger section size than 35CrMo steel, such as big gear for locomotive traction, supercharger transmission gear, rear axle, gearbox gear, engine cylinder, connecting rod under heavy load, spring clamp, drill pipe joint and fishing tool for 1200~2000m deep oil well, etc. The steel is also suitable for manufacturing large and medium-sized plastic moulds requiring certain strength and toughness. 42CrMo steel can obtain a wide range of properties through various heating methods. 42CrMo steel material can resist creep at 538 ° C (1000 ° F) high temperature, and can maintain its properties even if exposed for a long time at relatively high working temperature 42CrMo steel has good cutting performance. Suitable for drilling, sawing, broaching, tapping, milling and other processing. However, 42CrMo steel material is not easy to weld. 42CrMo steel is not recommended to be welded in quenched and tempered (QT) state. Because it will change the mechanical properties in the welding heat affected zone of 42CrMo steel. Under annealing condition, 42CrMo steel is allowed to be welded. However, if it is necessary to weld 42CrMo steel in the quenched and tempered state, the workpiece must be cooled immediately and the stress must be relieved at 15 ºC lower than the original tempering temperature

Packaging	1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 2. after making by bundle, covered with Polyethylene waterproof cloth. 3. make black paints painting on each bar, then make bundles
20 feet container contains dimension	Length under 6000mm
40 feet container contains dimension	Length under 12000mm
By bulk vessel	Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo

FAQ

1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.

2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;

3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.

5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese

6. How can we get your price?
A. We need the following information to quote for you:
1).  Product Name
2).  standard
3).  Material grade (chemical composition)
4).  dimension
5).  amount
6).  Special part drawin