Type: | Steel Bar |
---|---|
Standard: | AISI, ASTM, DIN, JIS, GB, BS |
Composition: | Alloy Steel |
Technique: | Hot Rolled |
Shape: | Bar |
Surface Treatment: | Blace/Polishing/Oiling or Galvanizing/ etc |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Grade | C | Si | Mn | Cr | Ni | Mo | P | S | Cu |
20Mn2 | 0.17-0.24 | 0.17-0.37 | 1.40-1.80 | ≤0.30 | ≤0.30 | ≤0.10 | ≤0.030 | ≤0.030 | ≤0.30 |
SMn420 | 0.17-0.23 | 0.15-0.35 | 1.20-1.50 | ≤0.35 | ≤0.25 | ≤0.030 | ≤0.030 | ≤0.30 | |
1524 | 0.19-0.25 | 0.15-0.30 | 1.35-1.65 | - | - | ≤0.040 | ≤0.050 | ≤0.20 | |
22Mn6 | 0.18-0.25 | 0.10-0.40 | 1.30-1.65 | ≤0.40 | ≤0.40 | ≤0.10 | ≤0.025 | ≤0.035 | ≤0.30 |
18Mn5 1.0436 |
0.15-0.20 | ≤0.40 | 0.90-1.60 | ≤0.30 | ≤0.30 | ≤0.08 | ≤0.025 | ≤0.015 | ≤0.30 |
SCMn2/SMn433/1330/1527/Gr.1330/ 28Mn6/1.1165/30Mn5/1.1170 |
0.27-034 | 0.17-0.37 | 1.40-1.80 | ≤0.30 | ≤0.30 | ≤0.10 | ≤0.030 | ≤0.030 | ≤0.30 |
35Mn2/SMn433/SMn438/1335/36Mn6/ 36Mn5/1.1167 |
0.32-0.39 | 0.17-0.37 | 1.4-1.8 | ≤0.30 | ≤0.30 | ≤0.15 | ≤0.035 | ≤0.035 | ≤0.15 |
40Mn2/SMn438/SMn438/ SMn443/1340/42Mn6/1.1055 |
0.37-0.44 | 0.17-0.37 | 1.4-1.8 | ≤0.30 | ≤0.30 | ≤0.15 | ≤0..35 | ≤0.035 | ≤0.30 |
45Mn2/SMn443/SMn443/ 1345/46Mn7/1.0912 |
0.42-0.49 | 0.17-0.37 | 1.4-1.8 | ≤0.30 | ≤0.30 | ≤0.15 | ≤0.035 | ≤0.035 | ≤0.30 |
50Mn2/50Mn7/1.0913 | 0.47-0.55 | 0.17-0.37 | 1.4-1.8 | ≤0.3 | ≤0.3 | ≤0.15 | ≤0.035 | ≤0.035 | ≤0.15 |
20CrNiMo/ SNCM220/8620/ 20NiCrMo2/21NiCrMo2/1.6523 |
0.17-0.23 | 0.17-0.37 | 0.6-0.95 | 0.4-0.7 | 0.35-0.75 | 0.2-3 | ≤0.035 | ≤0.035 | ≤0.3 |
40CrNiMo/ 39NiCrMo3/ 1.6510 | 0.37-0.44 | 0.17-0.37 | 0.5-0.8 | 0.6-0.9 | 1.25-1.65 | 0.15-0.25 | ≤0.025 | ≤0.025 | ≤0.3 |
Category | Grade | Diameter |
High speed steel | 6542,M2,M35,M42 | 1mm-600mm |
Mold steel | Cr12,Cr12MoV,Cr12Mo1V1,D2,SKD11,DC53 | 1mm-600mm |
Carbon structure steel | Q195, Q215, Q235, Q275 | 1mm-600mm |
Low alloy high strength structure steel | Q295, Q345, Q390, Q420, Q460 | 1mm-600mm |
Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 | 1mm-600mm |
Alloy structure steel | 30Mn2, 40Mn2, 27SiMn, 42Crmo,20Cr, 40Cr, 20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi,20MnVB, 20MnTiB, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V, 45MnV, |
1mm-600mm |
Spring Steel | 65Mn, 60Si2Mn, 50CrVA | 1mm-600mm |
Bearing Steel | GCr15, GCr15GD,55SiMoV | 1mm-600mm |
Structural steels subject to end-quench hardenability requirements | 20CrMnTi, 30CrMnTi, 20Cr, 40Cr, 30CrMo, 42CrMoA, 27SiMn, 40Mn2H, 20CrNiMo, 40Mn2, q345b, 35MnBM, 40MnB,45MnV. | 1mm-600mm |
Modulus of elasticity E /GPa |
Thermal conductivity λ/ W·(m·K)-1 | |||||
20ºC | 20ºC | 100ºC | 300ºC | 400ºC | ||
204 | - | 46.06 | 41.87 | 37.68 | ||
Linear expansion coefficient α/ 10-6 ·K-1 | Specific heat capacity c/J·(g·K)-1 | |||||
20~100ºC | 20~200ºC | 20~400ºC | 20~600ºC | ≈700ºC | 20ºC | |
- | 11.4 | 14 | 14.7 | 15 | 0.149 |
Main characteristics | Application examples | |
20CrNiMo
|
20CrNiMo steel is originally the steel grade 8720 in American AISI and SAE standards. The hardenability is similar to that of 20CrNi steel. Although the content of Ni in steel is half of that of 20CrNi steel, the upper part of the isothermal transformation curve of austenite moves to the right due to the addition of a small amount of Mo; also Due to the proper increase of Mn content, the hardenability of this steel is still very good, and its strength is also higher than that of 20CrNi steel
|
It is often used to manufacture gears in engines and transmission systems of small and medium-sized cars and tractors; It can also replace the manufacturing requirements of 12CrNi3 steel Carburized parts and cyanided parts with high core performance, such as the jaw and cone body of the cone bit used in petroleum
drilling and metallurgical open-pit mines |
40CrNiMoA
|
It has high strength, high toughness and good hardenability. When it is hardened to semi-martensitic hardness (HRC45), the critical hardenability diameter of water quenching is ¢ ≥ 100mm, and the critical hardenability diameter of oil quenching is ¢ ≥ 75mm; When hardening to 90% martensite, the critical diameter of water quenching is ≯ 80-90mm, and the critical diameter of oil
quenching is ¢ 55-66mm. This steel has stability against overheating, but it has high self-point sensitivity, temper brittleness, and poor weldability. It needs to be preheated at high temperature before welding, and stress relief treatment after welding |
It is used after quenching and tempering to make important parts requiring good plasticity, high strength and large size, such as
shafts with high load in heavy machinery Class II, turbine shaft, blade, high-load transmission parts, fasteners, crankshaft, gear, etc. with diameter greater than 250mm; It can also be used for rotor shafts and blades with operating temperature over 400 ° C. In addition, this steel can also be used to make special properties after nitriding Important parts required |
GRADE
|
SIZE(MM)
|
GRADE
|
SIZE(MM)
|
8#-10#
|
∮16-290
|
65Mn
|
∮40-300
|
15#
|
∮14-150
|
45Mn2
|
∮18-75
|
20#
|
∮8-480
|
60Si2Mn
|
∮16-150
|
35#
|
∮8-480
|
20CrMnTi
|
∮10-480
|
45#
|
∮6.5-480
|
20crmnTiB
|
∮16-75
|
Q235B
|
∮6.5-180
|
GCr15
|
∮16-400
|
40Cr
|
∮8-480
|
ML35
|
∮8-150
|
20Cr
|
∮10-480
|
T8-T13
|
∮8-480
|
42CrMo
|
∮12-480
|
Cr12
|
∮16-300
|
35CrMo
|
∮12-480
|
Cr12MoV
|
∮16-300
|
20CrMo
|
∮12-300
|
3Cr2W8V
|
∮16-300
|
38CrMoAL
|
∮20-300
|
45Cr50Cr
|
∮20-300
|
5CrMnMo
|
∮20-450
|
20CrMnMo
|
∮20-300
|
16Mn(Q345B)
|
∮14-365
|
40Mn2
|
∮28-60
|
50Mn
|
∮40-200
|
35Cr
|
∮55
|
15CrMo
|
∮20-75
|
15Mn
|
∮32∮170
|
25#
|
∮16-280
|
40CrMnMo
|
∮80-∮160
|
YF45MnV
|
∮28-80
|
20CrMnMo
|
∮20-300
|
30#
|
∮6.5-480
|
27 SiMn
|
∮20-350
|
30Crmo
|
∮28
|
Crwmn
|
∮20-300
|
30CrmnTi
|
∮16-300
|
H13(4Cr5MoSiVi)
|
∮20-300
|
60#
|
∮210.∮260
|
40crNimo
|
∮20-400
|
Packaging |
1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 2. after making by bundle, covered with Polyethylene waterproof cloth. 3. make black paints painting on each bar, then make bundles |
20 feet container contains dimension | Length under 6000mm |
40 feet container contains dimension | Length under 12000mm |
By bulk vessel | Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawin
Suppliers with verified business licenses