| Customization: | Available |
|---|---|
| Type: | Steel Bar |
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
|
Still deciding? Get samples of US$ 1500/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High quality structural steel This kind of steel must have both chemical composition and mechanical properties. Its brand is a two-digit representation of the average carbon mass fraction in steel ten thousand points (ω) *10000). For example, 45 steel indicates that the average mass fraction of carbon in steel is 0.45%; 08 steel indicates that the average mass fraction of carbon in steel is 0.08%. High quality carbon structural steel is mainly used to make machine parts. It is generally heat treated to improve mechanical properties. Depending on the carbon mass fraction, it has different uses. 08, 08F, 10, 10F steel, high plasticity, toughness, has excellent cold forming performance and welding performance, often cold rolled into sheet, used to make instrument shell, automobile and tractor cold stamping parts, such as car body, tractor cab; 15, 20, 25 steel is used for the production of small size, light load, surface requirements of wear resistance, core strength requirements are not high carburized parts, such as piston pin, template, etc. 30, 35, 40, 45, 50 steel after heat treatment (quenching + high temperature tempering) has good comprehensive mechanical properties, that is, has high strength and high plasticity, toughness, used to make shaft parts, such as 40, 45 steel is often used in the manufacture of automobile, tractor crankshaft, connecting rod, general machine tool spindle, machine tool gear and other small force shaft parts;
| C | Si | Mn | P | S | Cu | |
| 08F 1008 1010 SPHE SPHD |
≤0.1 |
according to requirements |
0.3-0.6 | ≤0.03 | ≤0.05 | ≥0.2 |
| 10# 1010 CK10 S10C S12C |
0.08-0.13 | 0.3-0.6 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 15# 1015 S15C S17C CK15 |
0.13-0.18 | 0.3-0.6 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 1020/20#/CK22/C22E/S20C/1.1151/1.0144/ | 0.18-0.23 | 0.3-0.6 | ≤0.03 | ≤0.05 | ≤0.2 | |
| 1025 25# 1.1158 S28C C25 | 0.22-0.28 | 0.3-0.6 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 1030 30# C30 CK30 S30C |
0.28-0.34 | 0.6-0.9 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 1035 35# C35 CK35 S35C | 0.32-0.38 | 0.6-0.9 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 1040/S40C/1.1186/C40E/SK40/1.1189/1.1186 | 0.37-0.44 | 0.6-0.9 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 1045 45# S45C S48C C45 |
0.43-0.5 | 0.6-0.9 | ≤0.04 | ≤0.05 | ≥0.2 | |
| 1050 50# S50C S53C C50 |
0.48-0.55 | - | 0.6-0.9 | ≤0.04 | ≤0.05 | ≤0.2 |
| 1055 55# C55 CK55 S55C |
0.5-0.6 | according to requirements | 0.6-0.9 | ≤0.04 | ≤0.05 | ≥0.2 |
| 1060/60#/1.1221/1.0601/C60E/CK60/S58C | 0.55-0.65 | according to requirements | 0.6-0.9 | ≤0.04 | ≤0.05 | ≥0.2 |
|
Flat Bar Size
|
Round Bar Size(mm)
|
|||
|
Thickness
|
Width
|
Length
|
Diameter
|
Length
|
|
10-700
|
155-2200
|
2000-6000
|
20-200
|
3000-6000
|
| Category | Grade | Diameter | Standard |
| High speed steel | 6542,M2,M35,M42 | 1mm-600mm | GB/T3077-1999 |
| Mold steel | Cr12,Cr12MoV,Cr12Mo1V1,D2,SKD11,DC53 | 1mm-600mm | GB/T3077-1999 |
| Carbon structure steel | Q195, Q215, Q235, Q275 | 1mm-600mm | GB/T700-2006 |
| Low alloy high strength structure steel | Q295, Q345, Q390, Q420, Q460 | 1mm-600mm | GB/T1591-2006 |
| Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 | 1mm-600mm | GB/T699-1999 |
| Alloy structure steel | 30Mn2, 40Mn2, 27SiMn, 42Crmo,20Cr, 40Cr, 20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi,20MnVB, 20MnTiB, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V, 45MnV, |
1mm-600mm | GB/T3077-1999 |
| Spring Steel | 65Mn, 60Si2Mn, 50CrVA | 1mm-600mm | GB/T1222-2002 |
| Bearing Steel | GCr15, GCr15GD,55SiMoV | 1mm-600mm | GB/T18254-2002 |
| Main features | Application examples | |
| 50 | High strength medium carbon structural steel has low cold deformation ability and medium machinability. Poor weldability, no temper brittleness, low hardenability, easy to crack during water quenching. Use status: normalizing, tempering after quenching, high-frequency surface quenching, applicable to mechanical parts with high wear resistance under the condition of small dynamic load and impact | Forged gears, pull rods, rollers, shaft friction discs, machine tool spindles, engine crankshafts, agricultural machinery ploughshares, heavy load mandrels and various shaft parts, as well as minor damping springs, spring washers, etc |
| 55 | It has high strength and hardness, poor plasticity and toughness, medium machinability, poor weldability, poor hardenability, and easy to crack when water quenched. It is mostly used after normalizing or tempering treatment, and is suitable for manufacturing high-strength, high-elastic and high-wear parts | Gear, connecting rod, wheel rim, rim, locomotive wheel rim, flat spring, hot rolling roller, etc |
| 60 | It has high strength, high hardness and high elasticity. During cold deformation, the plasticity is poor, the machinability is medium, the weldability is poor, the hardenability is poor, and the water quenching is easy to crack; Therefore, large parts shall be normalized. | Roll, shaft, wheel rim, spring coil, damping spring, clutch, wire rope |
Packaging |
1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 2. after making by bundle, covered with Polyethylene waterproof cloth. 3. make black paints painting on each bar, then make bundles |
| 20 feet container contains dimension | Length under 6000mm |
| 40 feet container contains dimension | Length under 12000mm |
| By bulk vessel | Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawin
){kind=link}