| Customization: | Available |
|---|---|
| Type: | Steel Bar |
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
|
Still deciding? Get samples of US$ 1500/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
On the basis of increasing the content of silicon and manganese in GCr15 steel, its hardenability, elastic limit and wear resistance are significantly improved, cold processing deformation medium, slightly poor machinability, poor weldability, more sensitive to the formation of white spots, there is a tendency of temper brittleness. It is used for manufacturing large-size bearing rings, steel balls, tapered rollers, cylindrical rollers, spherical rollers, etc. The working temperature of bearing parts is less than 180°C. It is also used for manufacturing molds, measuring tools, taps and other parts requiring high hardness and wear resistance
| Grade | C | Si | Mn | P | S | Cr | Ni | Cu |
| minimum value | 0.9 | 0.5 | 1 | - | - | 1.4 | - | - |
| Maximum value | 1.05 | 0.7 | 1.2 | 0.03 | 0.025 | 1.65 | 0.3 | 0.3 |
Production Range |
Outer Diameter:6-530mm (0.24 inch - 21.18 inch) |
| Wall Thickness:0.8-200mm (0.03 inch - 7.89 inch) | |
Material / Grade |
Carbon Steel: GB/T 3094: 10#, 20#, 35#, 45#, 55#, Q235B, Q235C, CF53, A105 ASTM A519: 1010, 1020, 1026, 1035, 1045, 1050 DIN17121/EN 10297-1, DIN1629/DIN2391/EN 10305-1: C10/CK10, C22/CK22, C35/CK35, C45/CK45, CF53 JIS3441/JIS3444/JIS3445: STKM11A, STKM12A/STKM12B/STKM12C, STKM13A/STKM13B/STKM13C JIS G4051: S10C, S20C, S25C, S35C, S45C, S55C |
| Alloy Steel: GB/T 3094: 16Mn(Q345B), 20Cr, 40Cr, 15CrMo, 20CrMo, 28CrMo, 30CrMo, 35CrMo, 42CrMo, 20CrMnTi, 40MnMoV, 20Mn2, ZF6, 16MnCr5, 20MnCr5, 38Mn2V, 09CrCuSb(ND) ASTM A519: 5120, 5140, 4130, 4135, 4140 DIN17121/EN 10297-1, DIN1629/DIN2391/EN 10305-1: ST52, EN10084-1998 20Cr4, 41Cr4, 15CrMo4, 25CrMo4, 35CrMo4, 42CrMo4, 16MnCr5 JIS3441/JIS3444/JIS3445: SCM432/SCRRM3, SCM4 JIS G4053: JIS SCr420, JIS SCr440, SCM415, SCM420 |
|
| Tolerance | Can be customized according to customer's requirements |
| Technique | Cold Drawn / Cold Rolled |
| Shape | Triangle, Hexagon, Square, Rectangle, Octagon, Lemon Pipe and Others can be customized |
| Further Processing for Steel Tubes | Cutting, Chamfer, Threading, Inner diameter or Outer Diameter Lathe, Surface Shot Blasting, Laser Marking |
This is a kind of alloy quenched and tempered steel with better performance and more economy. The steel has good hardenability. The critical hardenability diameter in water is 24~47.5 mm, and in oil is 11~27.5 mm. After quenching and tempering, the steel has high strength and wear resistance, good toughness and labor resistance, good machinability, and medium cold deformation plasticity; However, the weldability is poor. During heat treatment, there is a tendency of temper brittleness, slight decarburization, white spots and overheating sensitivity. Compared with 40Cr steel, this steel has the same properties as the quenched and tempered parts with a section of less than 60mm, except that the impact value at low temperature (below - 20 ºC) is slightly lower. Used as medium speed and medium load parts; Or it can be used as parts with high load and little impact under quenching and tempering conditions, or as parts with large cross section and requiring surface quenching. In the general machinery industry, this steel is used to manufacture transmission gears, main shafts, mandrels, rotating shafts, connecting rods, worms, trolley shafts, generator shafts, crankshafts, flywheels and large and small forgings; In the manufacture of steam turbine, it is used as the main shaft and hub with working temperature below 400 ºC and diameter within 250mm, impeller with thickness below 170mm and various important fasteners; In agricultural machinery, it mainly manufactures wear-resistant parts such as hoe handle, plough shaft, etc. In addition, it can also be used as thin wall seamless steel pipe. This steel can completely replace 40Cr as quenched and tempered steel or partially replace 40CrNi steel in addition to requiring high impact toughness at low temperature (below - 20 ° C)
|
condition
|
Heat treatment or condition
|
tensile strength
σb Mpa |
Yield point
σs Mpa |
Elongation
δ % |
Reduction of area
ψ % |
hardness
HBW |
Impact absorbed energy
KV2 J |
|
Bar
|
+QT
|
1650-1950
|
≥1500
|
≥5
|
≥35
|
-
|
KU
≥18 |
|
Bar
|
+S
|
-
|
-
|
-
|
-
|
≤280
|
-
|
|
Bar
|
+A
|
-
|
-
|
-
|
-
|
≤248
|
-
|
|
Bar
|
+AC
|
-
|
-
|
-
|
-
|
≤230
|
-
|
Packaging |
1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 2. after making by bundle, covered with Polyethylene waterproof cloth. 3. make black paints painting on each bar, then make bundles |
| 20 feet container contains dimension | Length under 6000mm |
| 40 feet container contains dimension | Length under 12000mm |
| By bulk vessel | Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawin
){kind=link}